Sto cercando di configurare una VLAN usando un router RB962UiGS-5HacT2HnT (hAC up) e uno switch CSS326-24G-2S-RM
Il problema che riscontro è che il router non tagga i pacchetti e lo switch nella pagina "hosts" li vede come appartenenti alla VLAN 1.
Ovviamente sbaglio da qualche parte... ma dove??
Grazie per l'aiuto
Nicola
- Codice: Seleziona tutto
# model = RB962UiGS-5HacT2HnT
/interface bridge add admin-mac=C4:AD:43:F0:67:BD auto-mac=no comment=defconf ingress-filtering=yes name=bridge vlan-filtering=yes
/interface vlan add interface=bridge name=vlan20 use-service-tag=yes vlan-id=20
/interface bridge port add bridge=bridge interface=ether2
/interface bridge vlan add bridge=bridge tagged=ether2 vlan-ids=20
/ip address add address=192.168.20.81/24 interface=vlan20 network=192.168.20.0
/ip address add address=192.168.20.82/24 interface=ether2 network=192.168.20.0
Solo ether2 è collegata allo switch, controllo il router tramite winbox collegato alla wlan1.