Ciao a tutti,
ho una RB1100AH con due WAN:
pppoe-out1
pppoe-out2
e tre LAN:
192.168.3.0/24 (eth3)
192.168.0.0/24 (eth2)
192.168.114.0/24 (eth4)
Vorrei configurare in modo che la lan su eth3 esca su pppoe-out2
mentre le altre due LAN escano su ppoe-out1.
Ho configurato delle regole di mangle
chain: prerouting; src-address: 192.168.3.2-192.168.3.254; action: mark routing; new routing mark: to_WANppp-out2; Passthrough: yes.
chain: prerouting; src-address: 192.168.0.1-192.168.0.254; action: mark routing; new routing mark: to_WANppp-out1; Passthrough: yes.
chain: prerouting; src-address: 192.168.114.2-192.168.114.254; action: mark routing; new routing mark: to_WANppp-out1; Passthrough: yes.
Sembra tutto funzionare correttamente, le LAN escono dalle rispettive WAN, ho un solo problema: non riesco ad uscire su internet dalla routerboard. Ovviamente non riesco ad accedere al router neanche dall'esterno.
Qualcuno può aiutermi?
grazie