ho un mAP Lite che devo configurare in modo che la mia tv si possa collegare in Wi-Fi perciò collegherei la presa ethernet del mAP lite alla athernet della mia tv.
ho configurato il map lite in questo modo sembra connesso al WiFi ma non mi da connessione sulla porta ethernet. dove sbaglio?
# jan/02/1970 01:12:15 by RouterOS 6.40.8
# software id = EJER-ZBZ2
#
# model = RouterBOARD mAP L-2nD
# serial number = 95DA0965DA4C
/interface bridge
add name=bridge1
add name=lan
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk group-ciphers=\
tkip,aes-ccm mode=dynamic-keys supplicant-identity=MikroTik \
unicast-ciphers=tkip,aes-ccm wpa-pre-shared-key=12345678 \
wpa2-pre-shared-key=12345678
add authentication-types=wpa-psk,wpa2-psk eap-methods="" group-ciphers=\
tkip,aes-ccm management-protection=allowed mode=dynamic-keys name=psw \
supplicant-identity="" unicast-ciphers=tkip,aes-ccm wpa-pre-shared-key=\
14062014 wpa2-pre-shared-key=14062014
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n country=italy disabled=no \
frequency=2462 frequency-mode=regulatory-domain mode=station-pseudobridge \
security-profile=psw ssid=ViMi wireless-protocol=nv2-nstreme-802.11
/interface bridge port
add bridge=lan interface=wlan1
add bridge=lan interface=ether1
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
add dhcp-options=hostname,clientid disabled=no interface=lan
/ip dns static
add address=192.168.88.1 name=router.lan
/system clock
set time-zone-name=Europe/Rome
