figheras ha scritto:In fase di bilanciamento basta specificare la subnet (dichiarandola in SRC-address) invece dell'interfaccia in ingresso (lato LAN)
Un esempio del tipo, invece di fare come nella guida:add chain=prerouting dst-address-type=!local in-interface=ether3 per-connection-classifier=both-addresses:2/0 \ action=mark-connection new-connection-mark=ether1_conn passthrough=yes
Fai così:add chain=prerouting src-address=192.168.10.0/24 dst-address-type=!local per-connection-classifier=both-addresses:2/0 \ action=mark-connection new-connection-mark=ether1_conn passthrough=yes
Perfetto allora. Grazie mille.