da rosario » mer 22 lug 2015, 15:12
Salve a tutti, ho inserito questa configurazione ma il pcc non funziona, tutti navigano tramite la connessione primaria. Grazie a tutti
- Codice: Seleziona tutto
/ip firewall mangle
add action=mark-connection chain=input comment="" disabled=no in-interface=eteher1-WAN1 new-connection-mark=Telecom passthrough=yes
add action=mark-connection chain=input comment="" disabled=no in-interface=ether7-WAN2 new-connection-mark=Linkem passthrough=yes
add action=mark-routing chain=output connection-mark=Telecom new-routing-mark=to_WAN1
add action=mark-routing chain=output connection-mark=Linkem new-routing-mark=to_WAN2
add chain=prerouting dst-address= 82.185.180.152/30 in-interface=bridge-local
add chain=prerouting dst-address=192.168.1.0/24 in-interface=bridge-local
add action=mark-connection chain=prerouting dst-address-type=!local hotspot=auth in-interface=bridge-local new-connection-mark=Telecom per-connection-classifier=both-addresses-and-ports:2/0
add action=mark-connection chain=prerouting dst-address-type=!local hotspot=auth in-interface=bridge-local new-connection-mark=Linkem per-connection-classifier=both-addresses-and-ports:2/1
add action=mark-routing chain=prerouting connection-mark=Telecom in-interface=bridge-local new-routing-mark=to_WAN1
add action=mark-routing chain=prerouting connection-mark=Linkem in-interface=bridge-local new-routing-mark=to_WAN2
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1-WAN1
add action=masquerade chain=srcnat out-interface=ether7-WAN2
/ip route
add check-gateway=ping distance=1 gateway=82.185.180.152 routing-mark=to_WAN1
add check-gateway=ping distance=1 gateway=192.168.1.1 routing-mark=to_WAN2
add check-gateway=ping distance=1 gateway=82.185.180.152
add check-gateway=ping distance=2 gateway=192.168.1.1
