da pierpul » mer 17 ott 2012, 9:05
Buongiorno.
Ho osservato con attenzione i Log che mi forniscono le Bullet M2 che fungono da AP alle quali sono collegate le Nanostation2 dei clienti che si disconnettono.
Questi i risultati:
Oct 16 17:53:17 hostapd: ath0: STA 54:e6:fc:c9:f1:59 IEEE 802.11: associated
Oct 16 17:53:17 wireless: ath0 Registered node:54:E6:FC:C9:F1:59
Oct 16 17:53:18 hostapd: ath0: STA 54:e6:fc:c9:f1:59 WPA: received EAPOL-Key msg 2/4 in invalid state (10) - dropped
Oct 16 17:53:18 hostapd: ath0: STA 54:e6:fc:c9:f1:59 WPA: received EAPOL-Key with invalid MIC
Oct 16 17:53:21 hostapd: ath0: STA 54:e6:fc:c9:f1:59 WPA: PTK: Failed to receive EAPOL-Key msg 4/4 response, all tries exhausted.
Oct 16 17:53:21 hostapd: ath0: STA 54:e6:fc:c9:f1:59 IEEE 802.11: deauthenticated due to local deauth request
Oct 16 17:53:21 hostapd: ath0: STA 54:e6:fc:c9:f1:59 IEEE 802.11: disassociated
Oct 16 17:53:21 wireless: ath0 Sending deauth to 54:e6:fc:c9:f1:59. Reason: Unspecified (15).
Oct 16 17:53:21 wireless: ath0 Expired node:54:E6:FC:C9:F1:59
Oct 16 17:54:17 wireless: ath0 Registered node:54:E6:FC:C9:F1:59
Oct 16 17:54:17 hostapd: ath0: STA 54:e6:fc:c9:f1:59 IEEE 802.11: associated
Oct 16 17:54:18 hostapd: ath0: STA 54:e6:fc:c9:f1:59 WPA: received EAPOL-Key msg 2/4 in invalid state (10) - dropped
Oct 16 17:54:18 hostapd: ath0: STA 54:e6:fc:c9:f1:59 WPA: received EAPOL-Key with invalid MIC
Oct 16 17:54:21 hostapd: ath0: STA 54:e6:fc:c9:f1:59 WPA: PTK: Failed to receive EAPOL-Key msg 4/4 response, all tries exhausted.
Oct 16 17:54:21 hostapd: ath0: STA 54:e6:fc:c9:f1:59 IEEE 802.11: deauthenticated due to local deauth request
Oct 16 17:54:21 hostapd: ath0: STA 54:e6:fc:c9:f1:59 IEEE 802.11: disassociated
A questo punto sembra che ci sia un problema di autenticazione WPA. E' come se l'AP non riuscisse ad accettare le password WPA dei clienti (che sono sicuro siano esatte) e li butta fuori.
I clienti hanno degli IP dinamici assegnati direttamente dalla Routerboard PPPOE Mikrotik.
Secondo voi, può essere una soluzione assegnare degli IP statici ad ogni cliente e rimuovere completamente la criptazione WPA, lasciando i collegamenti gestiti solo dal PPPOE?
E poi, l'opzione "aggregazione" nelle Nanostation2 a cosa serve? Grazie