Salve, ho un problema con map 2nd usata come client di seguito la configurazione,
la domanda è perchè con questa configurazione non riesco a raggiungere l'ip 10.0.0.2
se invece di utilizzare il bridge utilizzo la singola porta tutto funziona.
# model = RouterBOARD mAP 2nD
# serial number = 936B0A80817D
/interface bridge
add name=bridge1
/interface ethernet
set [ find default-name=ether1 ] auto-negotiation=no
set [ find default-name=ether2 ] auto-negotiation=no
/interface pwr-line
set [ find default-name=pwr-line1 ] disabled=yes
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk,wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=profile1 supplicant-identity="" wpa-pre-shared-key=Andres280513 wpa2-pre-shared-key=Andres280513
/interface wireless
set [ find default-name=wlan1 ] antenna-gain=0 band=2ghz-b/g/n channel-width=20/40mhz-eC country=no_country_set disabled=no frequency=2462 frequency-mode=manual-txpower mode=station-pseudobridge security-profile=profile1 ssid="Casa Agosta"
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp_pool1 ranges=10.0.0.3-10.0.0.6
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 hw=no interface=ether2 learn=yes
add bridge=bridge1 hw=no interface=ether1 learn=yes
/ip address
add address=10.0.0.1/29 interface=bridge1 network=10.0.0.0
/ip dhcp-client
add disabled=no interface=wlan1
/ip dhcp-server network
add address=10.0.0.0/29 dns-server=10.0.0.1 gateway=10.0.0.1
/ip dns
set allow-remote-requests=yes
/ip firewall nat
add action=masquerade chain=srcnat
add action=dst-nat chain=dstnat dst-port=80 protocol=tcp to-addresses=10.0.0.2
add action=dst-nat chain=dstnat dst-port=81 protocol=tcp to-addresses=10.0.0.2
add action=dst-nat chain=dstnat dst-port=5000 protocol=tcp to-addresses=10.0.0.2
/system clock
set time-zone-name=Europe/Rome
