Installando il cts di radius manager ho riscontrato il seguente problema su queste stringhe
1.
Add the following firewall rule to the filter chain:
/ip firewall filter add chain=forward src-address=10.5.7.0/24 protocol=tcp \ connection-
state=new action=log
/ip firewall filter add chain=forward src-address=10.5.7.0/24 protocol=udp \ connection-
state=new action=log
It will log all UDP and TCP packets going through the logger router.
2.
Enable remote logging for firewall events:
/system logging action add name=remote1 remote=192.168.0.3:4950 target=remote
/system logging add topics=firewall action=remote1
Test the CTS logging on Linux by executing the
rmconntrack
command in debug mode:
Il passo 1 tutto ok quando vai vado a inserire /system logging action add name=remote1 remote=192.168.88.249:4950 target=remote
mi da errore. Allego lo screen
